Turn Your Plastic Jugs into
 Funnels, Sprinklers & Spouts

Adapt-A-Jug®

Extend your reach by over 9” to pour accurately with no spillage!  Reduce the risk of messy, potentially environmentally harmful spills, and save money with Adapt-A-Jug® 

The Adapt-A-Jug® spout is made from 30% postindustrial regrind polypropylene plastic.  It is designed to fit millions of quart and gallon-size plastic containers.

Adapt-A-Jug® comes neatly packaged in a 2-piece pack that contains an adapter funnel tube, as well as a curved spout.

This is a great tool for your pollution prevention event!

Take the splash out of fluid transfer.  Keep your engine cleaner, your home safer.  Use Adapt-A-Jug® to save time and money with every use.

adapt a jug header bg_2

Custom Printing

See more images of Adapt-A-Jug® here

Size Details

Adapt-A-Jug® has both 28 mm threads and 38 mm threads

Adapt-A-Jug® can be ordered with custom imprinting on the adapter funnel tube, or custom labels can be added to the header card of the packaging.  Adapt-A-Jug® can showcase your logo, slogans and contact information, making this handy tool a ready reminder of your business or organization. 

CAUTION: Containers which originally held caustic or toxic material should NOT be reused.  Adapt-A-Jug® components should be thoroughly cleaned after each use to avoid contamination.

Find uses everywhere: Lawn & Garden, Detergents & Cleaners, Automotive Fluid, Power Equipment, Fuel & Additives and more!

Learn about pollution prevention at the EPA Website

fitbig four jugs2

Snap & Pour®

Turn your plastic jugs into funnels and spouts with Snap & Pour®.  Just Snap, and Pour.  Hands Free, No Mess.

Snap & Pour® spouts are made from 30% postindustrial regrind polypropylene plastic.  They are designed to fit most 28-38 mm thread containers found in homes, garages and industry everywhere.  Snap & Pour® spouts help eliminate point source pollution by keeping fluids where they are supposed to be.

Snap & Pour® comes neatly packaged in a 2-piece pack that contains one Snap & Pour® spout designed to fit gallon and half-gallon size containers, and one Snap & Pour® spout designed to fit quarts, pints, 1 and 2-liter containers.  Both sizes are also available separately (minimum quantities apply).

NEW! The new and improved Snap & Pour® Spout is made with 100% post-consumer recycled plastic.  We collect discarded plastic bottle caps, butter tubs, yogurt cups and other polypropylene goods, then grind them right here in our warehouse.  The shredded plastic is melted down and injection-molded into a new Snap & Pour® Spout, made right here in the USA!

The improved Snap & Pour® has a modified spout that allows for ventilation while pouring - preventing more spills than ever before.  It also has a new side-hanging-hook, which allows for easier, cleaner storage. 

Check out the new Snap & Pour® product demonstration on our new Product Demonstration Video Page!

Take the splash out of fluid transfer!  Keep your engine cleaner and your home safer - use Snap & Pour® spouts and save yourself time and money with every use.

Gallon & Quart Sizes

Size Details

The Snap & Pour® measures 5 3/8” Length.  They fit most 28-38 mm threaded plastic containers.

Custom Printing

Snap & Pour® spouts can be ordered with custom one-color imprinting or custom labels.  Both spouts have an imprint area of 1 1/2” W x 1” H.

CAUTION: Containers which originally held caustic or toxic material should NOT be reused.  Snap & Pour® spouts should be thoroughly cleaned after each use to avoid contamination.

Color Details

The Snap & Pour® Quart-Size is available in black or red.
The Snap & Pour® Gallon-Size is available in black or yellow.
The New & Improved Snap & Pour® is currently being custom-made.
Please contact us to order yours today!

snap & pour bg_split2
snap-and-pour-collage

Uses include:  Small & Large Engine Applications, Antifreeze, Windshield Washer Fluid, Garden Chemicals, Detergents & Cleaners, Power Equipment, the list goes on!

See more images of Snap & Pour® here

Learn about point source pollution at the EPA Website

Copy of New S&P1

EcoSpout™

Copy of milkjugsprinkler
DSCN3009

EcoSpout™ turns an empty jug into a watering can with a sprinkler, funnel or spout.  Hands Free, No Mess!

EcoSpout™ is made from 30% postindustrial regrind polypropylene plastic.  The great design fits most 28/38 mm threaded containers, PLUS the Adapter screws into snap-cap jugs and fits other non-standard threaded jugs.

EcoSpout™ features 4 handy components:

 

DSCN2994

Curved Spout with Funnel Tube

Funnel Tube & Adapter

Sprinkler Rose

Greenhouse & Indoor Gardening Applications
For seedlings or cuttings, a gentle shower of your custom mix (using the sprinkler rose attachment with any jug) is an excellent way to promote foliar and root growth without waste or spillage.  Using the funnel attachment is essential when watering tight places.  Then, replace the spout with the original bottle cap to store your solution safely until needed again.  Interchangeable fittings for different applications, that’s EcoSpout™!

See more images of EcoSpout™ here

Color Details

EcoSpout™ comes in green and white (as pictured)

Custom Printing

Some customization is available on EcoSpout™ with a custom label applied to the header card of the packaging (only available on certain quantities).

CAUTION: Containers which originally held caustic or toxic material should NOT be reused.  EcoSpout™ should be thoroughly cleaned after each use to avoid contamination.

Ecospout funnel tube and adaptrSM1

* Funnel Tube - connects to your jugs
* Adapter - allows for connection to snap-cap &
   nonstandard jugs, too
* Curved Spout - for precise, controlled pouring
   every time
* Sprinkler Rose - creates a rain shower for plants

Each EcoSpout™ comes neatly packaged with all 4 components for your convenience.  All of the pieces snap together for a tight, no-drip fit.

EcoSpout™ fits millions of gallon, half-gallon and quart jugs.  Take the splash out of fluid transfer! 

Adapt & Pour™

Adapt & Pour™ gives you all the advantages of both the Adapt-A-Jug® and the Snap & Pour® spout in one convenient package.  Save money and prevent messy spills with Adapt & Pour™

The Adapt-A-Jug® spout is made from 30% postindustrial regrind polypropylene plastic.  It is designed to fit millions of quart and gallon-size plastic containers.

Snap & Pour® spouts are also made from 30% postindustrial regrind polypropylene plastic.  They are designed to fit most 28-38 mm thread containers (like gallon and quart size plastic jugs) found in homes, garages and industry everywhere.

Take the splash out of fluid transfer.  Keep your engine cleaner, your home safer.  When you use Adapt & Pour™ spouts, you save time and money with every use.

Size Details

Adapt-A-Jug® has both 28 mm threads and 38 mm threads

Each Snap & Pour® measures 5 3/8” Length.  They fit most 28-38 mm threaded plastic containers.

See more images of Adapt & Pour™ here

Learn about point source pollution at the EPA Website

Copy of Adapt&Pour4-pk
Copy of Adapt&Pourkit

Uses all around the home, garden & garage:
  Small & Large Engine Applications, Antifreeze, Windshield Washer Fluid, Garden Chemicals, Detergents & Cleaners, Power Equipment

 

Call Us:

1-800-778-5420 toll-free nationwide or
614-251-8585 in Central Ohio

Email Us:

Weisenbach Recycled Products

    Quality Funnels and Spouts
    made of recycled materials

No splashing.
No sloshing.
No third hand required.
No kidding!

 

Copy of Main Page1
Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon Sign up for our Email Newsletter
For Email Marketing you can trust